stock

Stock Program

1. Grating and Mats

SP Grating Pressure welded grates with edge binding and hot-galvanized Nominal mesh width 3032 (Mesh pitch = 34x38mm)		PR Grating Pressure welded grates with edge binding and hot-galvanized Nominal mesh width 3032 (Mesh Pitch = 34x33mm)		Grating Mats Pressure welded grating mats Rought iron and without edge binding Nominal mesh width 3032 (Mesh pitch = 34x38mm)
Grate Outside dimensions in, mm	Bearing bar dimension, in mm	Grate outside dimension, in mm	Bearing bar dimension, in mm	Mat Outside dimension, in mm	Bearing bar dimension, in mm
500x1000	30x2 and 30x3	500x1000	30x2 and 30x3	6100x1000	25x2
600x1000		600x1000			30x2
700x1000		700x1000			30x3
800x1000		800x1000			30x3 S1
900x1000		900x1000			40x2
*1000x950		*1000x950			40x3
*(1000x1000)		*(1000x1000)		Hot-galvanized and without edge binding
1100x1000		1200x1000		3000x1000	30x2 30x3
1200x1000		Nominal mesh widths 3010 (Mesh pitch = 34x11mm)
1500x1000	30x3	600x1000	30x2	Pressed Grating Mats Rought iron and without edge binding Nominal Mesh widths 3030/3010 (Mesh pitch = 34x33/34x11mm)
		800x1000
		*1000x950		2500x1200	30x2 30x 3
		*(1000x1000)

The Underlined dimension is the bearing bar dimension.

Grating Mats for further processing can be supplied quickly and at a favourable price.

*Citation from the Code of Practice for Metal Grating ZH 1/196, Para 3.1.1., Issued by

The (German) Employers' Liability Insurance Association:

(Square single grates shall be avoided in order to make sure that the correct bearing bar direction is maintained during installation.

Deviations shall be permissible provided that the square single grates are supported on all sides or improper installation is made

impossible by technical measures.)

2. Steps

Version: - pressure welded grating (SP) - hot-galvanized according to DIN 50976

Tread Width